【特材】海底世界 1/Magic Waterworld 1
【特材】海底世界 1/Magic Waterworld 1

【特材】海底世界 1/Magic Waterworld 1

商品貨號:X005

710

  • 選擇加購商品

    {{ addon.diff_text }}
    {{ addon.title }}
    優惠價{{ addon.price }}(限購 {{ addon.limit_max }} 件)
  • 商品描述
  • 常見問題

 海底世界 1/Magic Waterworld 1 


 貨號/NO    ✧  X005,X008

 尺寸/SIZE   ✧  一卷,8cm x 10M長(100cm循環)/One Roll, 8 cm*10M ( 100cm Loop )

 印刷1/Printing 1 ✧ 特油+銀河光(無透光效果)

                                       Special oil + Partial White Ink (No Light Transmission Effect)+ Galaxy Light

 印刷2/Printing2  ✧ 特油+貝殼光(無透光效果)

                                       Special oil + Partial White Ink (No Light Transmission Effect)Pearlescent


 重量/Weight    170~175 g170~175 grams

 材質/Material   亮PET,自帶離型紙,可重覆黏貼/Gloss finish PET Tape With Release Paper, Re-stickable.

 

 產地/Place of Origin 

臺灣/Printed in Taiwan

大年印刷 承製

 

 購買須知/Purchase Notes 

圖片會因拍攝時的光源、色溫或螢幕設定不同而產生色差,實際顏色以實品為準,無法接受者,請勿下單。

Due to the difference between the display and the light source, the picture may not show the actual color.  Please prevail in kind, thank you!  Place order only if you accept it.

 

 保存方式/Storage Method 

強烈建議放置在陰涼處,請勿曝曬在陽光下、遠離潮濕處。

It is strongly recommended to place it in a cool place, do not expose it to the sun, and keep it away from moisture.


 購買指南/PURCHASE GUIDELINE 


 由於PET材質為塑料的關係,表面非常光滑且無毛細孔質,無法像和紙那樣粗糙可將油墨牢牢抓住,油墨主要是靠固化及表面張力的方式附著在PET表面,所以一旦墨經過破壞導致油墨和紙張中間有空氣進入,就很容易產生油墨剝離的現象。
 若圖面上已有:摺痕/切割/破壞/劃刀痕或是使用其它家印廠紙膠帶疊圖黏貼(黏性不同),在撕下時的力道太快/強或角度不對時,皆有可能造成整區塊圖面與PET材質分離;在不破壞圖樣的情況下,基本撕貼都不會有問題。


 上述情況皆屬於正常現象,並非瑕疵,故無法就此作賠償,若無法接受者,請勿下單。
 


 PET (short for Polyethylene terephthalate, the chemical name of polyester), when extruded into a flat surface object, its smooth and poreless character make it inert to other materials,  such as ink.  Unlike PET, Washi's rough surface facilitate ink adhesion.  Whereas on PET, ink or image transfer through a curing process.  The cured ink film(that is, the graphical image) adheres onto the PET via surface tension.  Therefore, if the cured ink film is damaged and air pass between the film and the PET surface, ink peeling will be resulted.

 If there are creases/cuts/damages/scratch marks on the graphical images(ie, the cured ink film), when users try to overlay other MTs(of  different adhesiveness) on it, the act of tearing the top layer of MT may break the interlock between the cured ink film and the PET surface.  As a result, the graphical images may peel off.  Nonetheless, if the graphical images(ie, the cured ink film) are not impaired, our MTs will function properly under basic usage.

 Since the above mentioned conditions are not cuased by defects in workmanship and materials, it is not covered by the warranty.  Please kindly take note BEFORE you place an order.

 

聯絡我們
  • -
  • ※ 當此商品補貨時會自動通知您
購物車
您的購物車是空的
  • {{ item.option_sort }}
    {{ item.quantity }}
    {{ item.price }}
    已下架